Posts Tagged ‘Water heater repairs’

Holiday Plumbing Issues

Posted on: December 12th, 2017 by Derek Barmer No Comments

 

With everyone coming over for the holidays, how can you avoid any major plumbing issues when there are many more people in the house using the toilets and sinks more than usual?

Before guests arrive, make sure there is a plunger in each bathroom. If you have a clogged toilet, a plunger will often be the solution. If you need extra help, use chemical drain cleaners or a drain snake. Turn off the water to the toilet first.

If you have a clogged drain, try a chemical drain cleaner, then a snake pipe, then if those don’t work, check the j-trap, which is the J-shaped pipe under your sink. Take it apart to see if the clog is in the j-trap. If it isn’t, the clog is further down the line, and you will need to call a professional plumber.

Be mindful of what you’re putting down the garbage disposal. (Don’t put eggshells, grease, etc. down it.) If yours does get clogged, though, you’ll notice that it is taking longer than usual to work. Your blades may need to be sharpened. You can do this by running a few ice cubes through the disposal. You can also press the reset button on the bottom of the unit.

If you don’t have hot water or the unit is leaking at the base, your water heater is broken. This means you’ll have to call a plumber. If your water heater is working, though, but you’re running out of hot water, it could be caused by sediment in the water tank. You will have to flush the unit. It could also simply mean your water heater is getting old. Of course, it could also be due to more people using the water than usual!

###

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

 

 

Signs Your Water Heater Will Fail

Posted on: December 2nd, 2017 by Derek Barmer No Comments


Your water heater will give you signs that it is about to fail. Pay attention to make sure you are prepared.

Rusty water coming from your water heater can be a sign that it is rusting on the inside and might leak soon. Check if the water is only coming from the hot side piping in your home. If you have galvanized piping, though, it may be your pipes that are rusty. Do a test by draining several five-gallon buckets of water out of the water heater. If the water is still rusty when it comes out after several buckets, the water heater is most likely the issue.

If your water heater is more than 10 years old, think about replacing it. Look for the serial number on the manufacturer’s sticker. This is on the upper portion of the water heater. The serial number will have the date that the water heater was manufactured. Typically, the first letter will represent the month. For example, “A” means January, “B” February, and so on. The two digits after that represent the year. For example 06 means 2006. If your code doesn’t look like that, check with the manufacturer.

Listen for rumbling or banging as your water heater heats up. Sediment builds up over time up on the bottom of the tank. As it is heated, it will harden after years. This is a sign that your water heater is not going to last much longer.

Look for moisture around your water heater. You might have a small leak or fracture in the tank. Heated metal expands, so a fracture would lead to leaks. When the metal has cooled the inner tank will stop leaking. Make sure the overflow pipe is not leaking. Check the fittings or connections to the tank. If they are dry, you may need to replace your water heater soon.

There are ways to help prevent a failing water heater if yours isn’t on its last legs, including inspections twice a year.

###

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

 

 

 

Prevent a Failing Water Heater

Posted on: July 24th, 2017 by Derek Barmer No Comments

 

It is a crucial part of your home and often completely forgotten about until a major issue comes up—the water heater. The main cause of water heater failure is age. The seam on the back of most water heaters rusts and deterioration happened generally between about 9 and 11 years.

What does this lead to? Typically, flooding. However it isn’t always a sudden burst—sometimes it is a slow leak that might be easy to miss if you’re out of town, not home much, or simply don’t go in the area where you water heater is very often (such as a basement.) It is a good rule of thumb to get a new water heater every 9 years or so.

While repairs and installations are best left to a professional, there are some steps you can take to help out this important piece in your house:

Get your water heater’s shut-off valve and all piping inspected once a year. Signs of broken valves as well as wet or loose joints and rust will be some signs that more severe damage is likely to come.

Getting your water heater flushed to remove the sediment once a year will help as well. Water heaters can be flushed by attaching a garden hose to the valve at the base of the water heater. Turn off the power and run hot water until it cools before flushing the tank since the heated water may be 140 degrees or more!

If you live in an area with hard water, installing a water softener can also extend the life of your water heater.

###

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!