Posts Tagged ‘emergency plumbers greensboro nc’

Tank vs Tankless- which water heater is right for your home?

Posted on: October 2nd, 2018 by Derek Barmer No Comments

Help, I need a new hot water heater! Tank vs. Tank-less?

What Type Do of Water Heater Do You Have?

Whether it’s a cold shower that tips you off, or a wet floor in the garage, the timing of a broken hot water heater is never ideal! And in most cases, there’s no notice your hot water heater is giving up at all. But when it does, you have a couple options. If your broken hot water heater was working sufficiently for you before, you can replace it with a similar hot water heater. If this is a floor standing model, this is likely your most cost-efficient option up front.

Regular Water Heaters

Unfortunately, if you had an older hot water heater that ran the course of its life, you may not be able to find that same model anymore. Additionally, if you have had challenges with the older model keeping up with your household’s hot water demand, you could either increase the water storage size or move to a tank that has a higher recovery rate. But keep in mind, if the size of the hot water tank is different than your original tank, you may have to make modifications to the space in which you install the hot water heater, which is an additional cost.  Gas hot water heaters often cost more than electric hot water heaters so keep that in mind and what you already have set up before purchasing a new one.

Tankless Water Heater Options

Your other option is to install a tankless hot water heater.  Despite the higher price point, they’re often more energy efficient and will likely save you money on your electric bill or gas bill long-term. A tankless water heater is an on demand system. It only heats the water once you turn it on. When it is sitting idle there is no energy used.

If sized properly, tankless hot water heaters can heat your whole house. You can place a hot water coil in your air handler. The tankless heater would circulate the hot water through the coil like a radiator on our car to heat your home. They can heat your home’s hot water as well all at once. Very rarely do you run out of hot water with the tankless heaters.

No matter what type of water heater you need, Central Carolina Air Conditioning, Electric & Plumbing is there to help.  Call to schedule your appointment today at 800-461-3010 and we will come out and review options with you on what’s right for you and your home!

 

Standard vs Comfort Height Toilets

Posted on: June 8th, 2018 by Derek Barmer No Comments

Whether you’re in a new home or used home, the kind of toilet you use is an important decision. Although it’s a needed appliance, the choices used to be almost non-existent. Today, there are now options on the market as more research has been released showing the importance of finding the right toilet for your needs.

There are benefits and draw backs for each one. Keep in mind a couple things when considering your choices – whichever toilet you choose should allow you to be able to easily rest both feet on the ground. You should also be able to easily get up and sit down.  A significant amount of research concludes that the ideal position for use of a toilet should be a squat position with the hips below the knees. 

 Standard Height Toilets:

  • These are typically the best option for shorter people, as they are only 15 inches above the ground.
  • Standard height toilets come in multiple colors and styles.
  • Depending on the brand, they usually cost more.

Comfort Height Toilets:

  • Because they are 16-19 inches above the ground, this option is ideal for taller people.
  • The extra 2 inches of height is not only beneficial for tall people, but often the choice for elderly and disabled.
  • Comfort height toilets also are available in a variety of colors and styles.
  • They are recognized as ADA (adults with disabilities) compliant.
  • Generally, comfort height toilets are a less expensive option, although the cost difference is marginal.

Central Carolina Air Conditioning, Plumbing & Electrical can help you determine which height works for your family and can also perform dye tests on all your toilets to ensure that there are no water leaks, which equate to money wasting. If your toilets are connected to a septic tank and there’s a water leak, then you could be wasting even more money! Not only can we provide dye tests, but we can also check all faucets in your home and all exposed hot and cold water lines to identify and repair any water leaks in your home.

Have more questions? Call us—we’d love to help! Call the professionals at Go Green Plumbing at 336-252-2999 for service 7 days a week/24 hours a day. If water runs through it – We Do It!

 

Septic Myths 

Posted on: March 11th, 2017 by Derek Barmer No Comments

 

A home’s plumbing system and septic tank are so important, and yet so often overlooked until there is a major problem. Here are some common myths about septic systems (and the pipes leading to them) that many homeowners believe:

Myth #1: You don’t have to get your septic tank pumped (or at least not very often)

Truth: You should get your septic tank pumped and inspected every one to three years, depending on its size and how many people live in your home.

Myth #2: Slow draining showers, sinks, tubs, washing machines, and toilets aren’t a big deal. 

Truth: This could be a sign that your tank needs to be pumped, or some other type of major plumbing issue. If you have gotten your tank pumped recently and know that is not the issue, you still shouldn’t wait to have a professional plumber come and look.

 

Myth #3: My well water doesn’t need any maintenance

Truth: If you have a septic system and a well, get the water tested once a year to see if nitrate levels are not too high, which could mean that waste water is overflowing your system and leaching into your water.

Myth #4: I need to use additives in my septic system

Truth: Additives will not prevent backup, properly break down solids, or prevent you from needing to pump and needing to be careful with your system. (In other words, it wouldn’t be a pass to allow you to suddenly start putting everything down the kitchen sink.)

Myth #5: Putting food, chemicals, medicines, etc. down the drain won’t harm the septic system.

Truth: If this is all new to you because you’re coming from a house or apartment without a septic system (especially with a garbage disposal), it may take some getting used to. It’s always best to not put anything except safe liquids such as water or drinks and septic-safe toilet paper and designated septic-safe products down the drain. Not only will this be good for your septic system, but your pipes and plumbing as well.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

Types of Water Filtration Systems

Posted on: February 16th, 2017 by Derek Barmer No Comments

We all need water. We all want clean water. So if you want to be sure your family has the cleanest water, what type of water filtration system should you purchase? It depends on how much you want to spend, what contaminants you want to remove, and how much work you’re willing to commit. Here are some of the primary choices:

Carbon/Activated Carbon: There is a wide range of carbon filters. Some only remove chlorine and improve taste and odor. Some remove a wide range of contaminants, including asbestos, lead, mercury and volatile organic compounds (VOCs). Keep in mind, though, that activated carbon cannot effectively remove common “inorganic” pollutants such as arsenic, fluoride, hexavalent chromium, nitrate and perchlorate.

Ceramic: Ceramic filters have small holes throughout the material that block solid contaminants such as cysts and sediments. They do not remove any chemical contaminants.

Deionization: These kinds of filters remove mineral salts and other electrically charged molecules (ions) from water. They cannot remove non-ionic contaminants (including trihalomethanes and other common VOCs) or microorganisms.

Reverse Osmosis: This process pushes water through a membrane that blocks particles larger than water molecules. It can remove many contaminants not removed by activated carbon, including arsenic, fluoride, hexavalent chromium and nitrates but doesn’t remove chlorine, trihalomethanes or VOCs. Many systems do include an activated carbon component. Reverse osmosis filters use 3-to-20 times more water than they produce, so they are only used for drinking and cooking water.

Water Softeners: These devices typically use an ion exchange process to lower levels of calcium and magnesium. They do not remove most other contaminants.

When shopping, if you’re looking to remove a particular contaminant, verify that it is certified for that contaminant by a reputable, independent agency.

Also, read the fine print. Some filters are labeled “NSF certified.” This is a reputable company, but its certifications are not all the same.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

How To Fix a Leaky Faucet

Posted on: February 9th, 2017 by Derek Barmer No Comments

 

It’s the annoying reality of being a homeowner. You will have issues you need to address, and there isn’t a landlord to take care of it for you. Plumbing is a common area in which homeowners see problems — especially, the trusty leak faucet.

So what steps can you take when you have a leaky faucet? First, turn your water off to all parts of the sink and take off any decorative parts of the handles/knobs.

Next, loosen the screw that connects the handle to the stem of the knob. (You’ll need a flat-head screwdriver.) Once you remove the screw, you can use WD-40 if needed to help take the handle off. After that, unscrew the packing nut with a wrench. Then remove the stem. (Some pop off easily while others need to be twisted.)

If everything so far looks good, take a look at the O-ring and washer inside the valve seat, as they are commonly the cause of leaks. Remove the washer and put in a replacement. Make sure the replacement washers and O-rings fit exactly. Check to see if the sides fit a flat or cone-shaped washer. It’s not a bad idea to take the old O-ring to the store to make sure you get the right size. Another option is to buy a packaged set that includes many different sizes.

You’ll then put everything back together—washer/O-ring, stem, packing nut, screw, handle. Then test to see if you have fixed the leak. Turn the water back on and turn the knob slowly.

If the faucet is still dripping then it may be corrosion in your valve seat. If time has passed and it has not been cleaned it can lead to leaks near the spout. Other common issues include loose parts or worn-out seals. If you cannot figure out the issue, or even if you can, but know you cannot fix it, call a professional plumber. It is best to not wait too long as these issues only get worse.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

Winterize Your Sprinkler System

Posted on: December 23rd, 2016 by Derek Barmer No Comments

 

 

images-3Did you know that water can remain in your irrigation system even after you’ve drained it? If that’s the case for your system, that means it could potentially freeze and expand during the cold winter months, then crack the PVC piping. Even with the more flexible polyethylene pipe, it can still expand under pressure and water inside can rupture the pipe walls.

To avoid this happening, implement the winterizing techniques like those listed below. If you don’t know what type of system you have its best to use the blowout method.

Manual Method and Automatic Method: 

  • If manual valves are at the end and low points of the irrigation piping, use the manual drain method. Shut off the irrigation water supply and open all the manual drain valves.
  • If automatic drain valves are at the end and low points of the irrigation piping, use the automatic drain method. Shut off the irrigation water supply (in the basement) and activate a station to relieve the system pressure.
  • In both methods, after the water has drained, open the boiler drain valve (or the drain cap on the stop and waste valve) and drain all the water that remains. Open the test cocks on the backflow device. If your sprinklers have check valves, pull up on the sprinklers to let water drain out of the bottom of the sprinkler body. When all the water has drained out, close the drain valves.

Blow Out Method: 

This method involves blowing out an irrigation system with compressed air. It is best to hire a professional to perform this type of winterization method as it takes particular knowledge as well as stringent safety precautions.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

Common Home Cleaning Mistakes

Posted on: December 5th, 2016 by Derek Barmer No Comments

 

 

Inevitably, when you have company over for the holidays, someone will spill red wine on your carpet or drop food onto the floor or counters. If you want to be prepared, take a look at some of these common cleaning mistakes many people make — and learn what to do instead.

images-5Don’t scrub that spill on the carpet — this can actually make it worse. Instead, scrape up as much as you can with a spoon (if you can). Blot the spot with a clean white paper towel or cloth and blot until dry. In addition, could place a pile of books on top of the towels and change them out frequently. Then treat the spot with a stain remover.

Natural cleaning agents like lemon juice and vinegar can be used on many things — but not everything. These acids can damage natural surfaces such as marble, limestone and onyx.

Not all cleaners are disinfectants. If a product has an EPA registration number it is a disinfectant. (It will say something like EPA Reg No.). Also make sure you leave the cleaner on the treated spot for the recommended amount of time.

Practice caution when using abrasive tools. The heavy-duty cleaning sponges can scratch surfaces such as plastic or ceramic cooktops. The magic erasers may damage surfaces like vinyl flooring.

Be aware of what you type of surface you are spraying directly with cleaning products. For glass, wood, stainless steel and electronics, spray a small amount onto a microfiber cloth then wipe the surface. Use a dry cloth to wipe away any excess liquid.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

Maintaining Your Water Heater

Posted on: December 2nd, 2016 by Derek Barmer No Comments

 

water heaterYou do not want your water heater to break down at this time of year — well, any time of year really, but definitely not when you need a hot shower after a cold day! Did you know that water heaters typically last for a decade or more?
If you maintain yours, it can last even longer. So how do you make sure yours is in good condition and when you need a new one?

An easy way to keep you water heater in good working condition and save money every month is to dial the temperature down. (This is also a good safety measure if you have young children that could easy turn the handle on a tub and burn themselves with hot water!) You’ll find a setting dial on your water heater—either a knob on the gas valve or thermostat behind an electric water heater panel. Dial it down to 115 to 120 degrees. This will not only reduce energy used to heat the water, but also protect the tank from overheating.

Test the T&P (temperature and pressure) relief valve. All you have to do is lift up on the lever part way and let it go so it will snap back. You’ll hear the water being released into the drain tube. If it did not do anything, it needs to be replaced.

Every year, conduct a mini flush. Sediment at the bottom of the tank leads to rust and inefficiency. All you have to do is put a bucket under the drain valve near the bottom of the water heater tank and turn the valve counter-clockwise to release a few gallons of water into the bucket. Sometimes you can do a full flush, but that requires more work and shutting down your water heater.

Finally, if your water heater does not heat efficiently and/or constantly needs repair, look for a new one. A new water heater is typically about a thousand dollars, often less.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

Common Plumbing Mistakes

Posted on: November 4th, 2016 by Derek Barmer No Comments

 

drainYour whole plumbing system is a major part of your home and needs to be taken care of properly or you can face some expensive repairs and replacements. Luckily, if your system is already in good shape, it’s easy to keep everything in good shape. Below are some common mistakes and what you can do instead:

Regularly clean out your drain traps. Poor drainage — especially clogging — can be a hassle and is not good for your pipes. Be cautious, though, not to overdo it when it comes to chemicals you pour down the drain, especially if you have a septic system. Drain snakes can also be also helpful.

Grease, paint and any construction materials down the sink are big “no-no’s”. Let the grease cool, then pour it into a jar or can and throw it away. As for paint and construction materials, use the proper disposal protocol in your area. Usually there is a specific place to take these materials so that you’re protecting your plumbing and the environment.

Don’t overload the garbage disposal or put things down it that should not be. This would include items such as old rice, coffee grounds or melon rinds.

Use your faucet handles with care. Twisting and pulling on them because there is a drip you’re trying to shut off is not the way to go. This will strip the washers and make things worse. Furthermore, if you’re doing your own plumbing work, don’t over tighten the parts.

If you need plumbing work done by a professional, get it done sooner rather than later. Not only can problems get worse, but also mold can grow if things are leaky.

Don’t turn on a water heater too soon. If you install a new water heater, let it fill completely before turning it on so you don’t burn it up.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!

Saving Water in Your Toilet

Posted on: June 30th, 2016 by Derek Barmer No Comments

toiletWant to save water?  About 45% of your total water usage is in the bathroom, and nearly 27% is in the toilet alone! Older toilets can use up to seven gallons per flush, while the most efficient ones use only 1.28 gallons per flush.  That is an annual difference for per person of a little more than 10,000 gallons per year.  That’s a lot of water that can be saved!

So what can you do to save water?  First, if you know you have older toilets that use a lot of water consider replacing them with new, lower flow units.  If you live in an area served by a municipal water supply and pay for water you can recoup your investment fairly quickly through the water and sewer charges.  If you depend on a well for water, you just may save yourself from a dry well during a drought.

If you don’t want to replace fixtures, consider ‘bricking’ your toilet.  You can use any item with sufficient weight to sink in and displace the water, but bricks are cheap and don’t corrode the toilet parts.  Place a brick in the back tank of your toilet.  This reduces the water that flows through the toilet with each flush.  And, as always fix any leaks, including flappers that don’t seal as soon as possible to reduce waste.  Also consider how you use your toilet.  Place used tissues in the wastebasket rather than flushing them.  This practice alone can save you a lot of money over time.

But remember, the new toilets are extremely cost effective and much more energy efficient.  We’re happy to review your plumbing issues and recommend the best course of action based on your budget.

Have a concern with your electrical, plumbing or air conditioning? Central Carolina Air Conditioning, Plumbing and Electrical is here to help! We offer 24 hour emergency service 7 days a week!  Give us a call! 1-800-461-3010 to speak with our customer service agents that can answer your questions or schedule an appointment!