Archive for July, 2018

Beware of These Safety Hazards In Your Home

Posted on: July 31st, 2018 by Derek Barmer No Comments

Daily life can get busy, which means we often forget to pay proper attention to little things that could potentially cause big problems. Appliances are a common use in every home – and oftentimes we use appliances multiple times a day. We’ll share effective ways that you can practice as part of your daily routine to prevent potential hazards. It only takes one time to start a fire, so the few extra seconds or minutes over the course of the day will be well worth it!

  • When it comes to any appliances that emit heat, such as a computer monitor, screen, clocks, tv, etc. make sure to provide ample space around the appliance so that it does not overheat. Normally a few inches would be enough space to allow for around these appliances.
  • Don’t attempt to fix any appliances yourself, and always read through instructions if you decide to do the initial set-up yourself.
  • While you may know that all electrical appliances should be kept away from water, consider any vents that could also potentially leak. Make sure that your electrical appliances are clear from any spot close to a vent.
  • When using power cords to increase range of use for lights, always make sure that there are no frays or kinks in the cords.
  • Always make sure that the power cords are tucked under the rugs and out of the way so there aren’t any trip hazards.
  • It may be convenient just to grab whichever power cord you see at the store, and going about your shopping trip to complete your shopping list. Take the time to match the power cord to the length and weight that you will need.
  • Be careful with outlets when using power strips so that they don’t become overloaded!
  • When it comes to light bulbs that you use in your home, consider trading out for energy efficient bulbs.
  • Match the light bulb wattage to the fixture.  Using one that emits too much light for the fixture is a possible fire!

   

It’s always important to make sure that your electrical panel is operating efficiently and safely.  Call Central Carolina Air Conditioning, Plumbing & Electrical to perform a thorough scan throughout your home, looking for any hot spots in your electrical system. We will also test the ground fault outlets to make sure that they are functioning properly. This is especially important for any outlets near water or other hazards!

Give us a call today Call to schedule your appointment today at 800-461-3010.

Avoid High Energy Bills with Energy Efficient Appliances

Posted on: July 25th, 2018 by Derek Barmer No Comments

Has there been a change in the size of your family or the needs of your family? Maybe it’s time you invest in a fridge that can adjust with your family’s needs that is energy efficient that will help avoid higher energy bills! The latest models available on the market today are often energy efficient to some degree and have one to many luxury options. We’re asking some questions you may not have considered yet, but your answers will help determine the best fridge-freezer model for you and your family!

 

  • Do you often access drinks and condiments? If so, you’ll want to consider a model that has a shallow inset so you can frequently grab a drink or other items, without compromising the temperature of the rest of the fridge.
  • Are there multiple little ones in the home? If this is the case for you, then it may be best to select an option that notifies you when the door is left open. There are even models that go a step further and notify you when the fridge is in need of a check-up.
  • Do you use the fridge as often as the freezer? For those who are grabbing frozen foods as often as fresh foods, this is probably the best choice and prevents bending down every time you need to grab something out of the freezer.
  • How often do you entertain or mix up the kind of food you store in the fridge or freezer? With all the advancements now available in fridges, you can get a custom cold model. You will be able to adjust the two freezer sections that come in a fridge model, making one of the freezers another fridge. So for times that you plan on needing extra fridge space, adjust the second freezer temperature temporarily, then turn it back to freezer temperature!

With all these considerations that play into choosing the right refrigerator, you certainly want to make sure that it is running properly and hooked up correctly. Call Central Carolina Air Conditioning, Plumbing & Electrical to tighten all panel connections. We can also perform load tests to make sure that your whole home’s load is properly distributed. This will help you avoid high power bills and excessive heat!

Give us a call today Call to schedule your appointment today at 800-461-3010.

Protect Your AC Unit From Water Damage

Posted on: July 19th, 2018 by Derek Barmer No Comments

Have you accounted for all the things that need maintenance OUTSIDE of your home? The roof can often be forgotten during the hot months, as people are more focused on efficiency of their Air Conditioners and staying cool indoors. The roof should not be neglected, however, because damage during the summer months could cost quite a bit in repairs. Sometimes it’s necessary to call a professional, but in this case, there are a few ways that you can perform maintenance without needing additional help. If you do choose to inspect the roof yourself, take a couple precautions. Wear gloves and watch your foot placement carefully. We’ve provided a checklist below to inspect all aspects of your roof! 

  • First, you will want to check all the gutters to make sure they are clean and without blockage, this way water can flow through them.
  • Obvious signs to look for are any missing shingles or cracks in shingles that need to be replaced.
  • Check the metal strips. Roofs often have a metal strip lining the gutters, so check to see if these have come loose during any summer storms.
  • Any sealants should still be in tact – make sure to fill them if there are any gaps.
  • Water damage can be pricey to fix. Routine summer maintenance on your roof is important to catch any damage hopefully early on. The eaves and overhangs should be checked to make sure there is no water damage.
  • Check for any mold – if there are signs of mold damage, now is the time to call a professional to prevent any further damage.

 

Now that your roof has been checked for water damage, among other things, let’s make sure your air conditioning unit is protected from water damage as well! Your AC unit may start to accumulate water, which is why there’s a device created to store the extra water, called a drain pan. There’s a possibility that your drain pan could become clogged, or even the drain line. Central Carolina Air Conditioning, Plumbing & Electrical can install a micro “float” switch that will automatically shut your unit off if the drain pain accumulates water past a certain point. You can have peace of mind that not only your home is protected, but also your unit from any possible water damage.

Give us a call today Call to schedule your appointment today at 800-461-3010.

 

Beware of Energy Drainers in Your Home

Posted on: July 12th, 2018 by Derek Barmer No Comments

You may not have heard of the term “standby power”, but you’re probably be very familiar with it.  Do you ever wonder why your electricity bill may be higher even though you are conscientious about turning the lights off before you leave your house? Well, standby power is anything that expends energy EVEN when its turned off, but plugged in.

Parents and children alike are spending more and more time on technology, whether it’s watching tv or playing games on an iPhone. These devices require charging, and often frequent charging with how much we use our devices. It’s a common habit to leave our chargers plugged in and other electronics or appliances. 

These are common devices and appliances that expend energy when they’re plugged in:  laptops, cell phones, game consoles, modems, printers, microwaves, toasters and coffee makers. It may not always be a convenient option to unplug a modem and repower every time. It may not even be possible to unplug your washer and dryer that could be blocking the area where they plug in. So we’ve created a list of alternative methods that will help you save energy on the appliances and devices draining power when they’re not used.

  • When it’s possible and not a huge hassle, unplug devices before you leave your home.
  • Consider using a power strip that will make it convenient to turn on off one switch for multiple devices, instead of having to turn off and on all those individual devices.
  • You can also consider getting a Kill-a-Watt meter to test your appliances to see how much electricity they are really using.
  • Invest in cell phone chargers that are automatic energy savers by “unplugging” when you aren’t using them.
  • Energy Star Appliances are the way to go for long term energy savings.

These are great ways to save energy and money, however, one the most significant money savings comes from your air conditioning unit. Central Carolina Air Conditioning, Plumbing & Electrical can come out and check your unit to ensure that it’s running efficiently, and we can continue to provide routine maintenance. We can also clean out your air filters, which will improve the quality of air in your home and save you money as well!  Also we can help review your electrical outlets and usage to see how you can further save money!

 

Give us a call today Call to schedule your appointment today at 800-461-3010.

 

 

Need To Replace a Ceiling Fan?

Posted on: July 10th, 2018 by Derek Barmer No Comments

If you’ve had a broken ceiling fan for a while, you probably feel the need to fix it during the heat waves of summer.  This is not a daunting task, if you have basic electrical skills, or can quickly learn basic electrical skills. Allow for some patience during this process, and plan on taking a couple breaks during the fan installment due to the heavy weight of the fans. It’s much easier if you have someone helping you!

Start by turning off all the switches to the ceiling fan, and then cut the power off at the circuit breaker box. (Make sure you have the proper switch, if you are going to control your fan with a wall switch. Depending on the brand of the fan, some may only be set to operate from a preset multi-speed switch).

– Make sure the wires are disconnected before removing the old fixture.  Check the electrical box to make sure that the ceiling is properly suited to hold the weight of a ceiling fan. You will probably find a fan weight rating inside the electrical box that will indicate whether the ceiling can hold the weight of the new fan you wish to install. 

Next, follow the fan instructions for the particular ceiling fan you are about to install. Most ceiling fans come with the light fixtures pre-installed.

-Instructions may require you to cut and strip the fan wires to fit accordingly.                           

-Hang the fan on the hook, if your ceiling plate or mounting bracket comes with a hook to support the wiring.

-While still following the manual instructions, connect wires using a wire connector. There should be no visible wires after the connecting process, except for the green ground wire.

Follow the manual instructions to attach the fan blades, which may need to be screwed on, or clipped on, depending on the fan model.

-If the fan is too wobbly, you can either attach a balancing kit that may be included with your fan, or you can buy them separately.

-Finally, turn switch back on at the circuit breaker. 

If you don’t have time or the patience to install a ceiling fan, give Central Carolina Air Conditioning, Plumbing & Electrical a call and we’d be happy to install it for you! While we’re out there, we can check your Air Conditioning Unit to make sure it’s running efficiently, so that not only your new ceiling fan but also your AC unit are providing the most comfortable atmosphere in your home!

Give us a call today Call to schedule your appointment today at 800-461-3010.

DIY Backsplash Part 2

Posted on: July 5th, 2018 by Derek Barmer No Comments

 

In a previous post, we explained how to prep your kitchen walls so that they are ready to be tiled for an instant upgrade. Now that your walls are prepped, it’s time for the measuring. You’ll want to start at the focal point of the kitchen which is most often above the oven and under the hood vent. Since you’ll be buying and cutting the tile sheets yourself, you will want the least amount of cutting possible.

 

  • Starting above your stove, measure from the top down where you want the backsplash to stop.
  • At the mark you want the backsplash to stop, screw a scrap piece of wood that will create a level place where the tile will stop. The wood piece will also hold the tile in place while the adhesive dries. (This is for the central part of your wall above the oven, so there is no counter top to keep the tile in place while the adhesive is drying).
  • Find the center of the wall and mark a vertical line for the backsplash. Leave 1/8 inch of space around the junction of the tile and cabinets for expansion. At this point, there should be a horizontal wood board on the wall signifying where the tile stops, and a vertical center line in the middle of the wall.
  • Use a trowel and spread tile adhesive on the wall where you will tile. It’s best to do one portion of the wall at a time and wipe the trowel off with water to prevent the adhesive from drying.
  • Starting at the center line you drew on the wall, apply the first tile sheet and press it with your hand. Use a scrap piece of wood and mallet to firmly press on the tile. If there’s any problem with the tile sticking, this means the adhesive is too thick and you’ll need to scrape off some before re-applying the tile.
  • Use tile spacers to make sure the tile pieces are even, and also a lever throughout the process for precision.
  • Once the tiles have all been laid, allow them to set for 24 hours.
  • Apply grout to the tiles – working in a diagonal motion. After a few hours, wipe off any grout haze that is left on the tiles.
  • After three days, apply a sealant to the grout to prevent any stains.


Although this is a tedious process, the money saved and value added will make the project well worth it! You now have an upgraded kitchen and a new skill! Make sure that your kitchen is not only looking good, but operating efficiently. Call Central Carolina Air Conditioning, Plumbing and Electrical to check your kitchen faucet for leaks. We’ll fix any leaks and save you from expensive repairs down the road and potentially 200 gallons of wasted water per day!

 

 

Give us a call today Call to schedule your appointment today at 800-461-3010.